Rainier AWD L6-4.2L (2007)
Notice: Refer to Fastener Notice.
7. Install motor/encoder mounting bolts to the transfer case.
Tighten the bolts to 16 N.m (12 lb ft).
8. Connect the motor/encoder electrical connector (1).
9. Install the fuel tank shield, if equipped. Refer to Fuel Tank Shield Replacement (TrailBlazer EXT, Envoy XL) Fuel Tank Shield Replacement
(TrailBlazer, Envoy).
10. Lower the vehicle. Refer to Lifting and Jacking the Vehicle.
