Rainier AWD L6-4.2L (2007)
3. Install the negative battery cable ground terminal bolt (3) to the engine block.
Tighten the bolt to 50 N.m (37 lb ft).
4. Install the negative battery cable ground terminal to the shock tower. Ensure that the anti-rotation tab is inserted into the hole in the shock tower.
5. Install the negative battery cable ground terminal bolt (5) to the shock tower.
Tighten the bolt to 10 N.m (89 lb in).
6. Install the negative battery cable ground terminal (1) to the left wheelhouse panel. Ensure that the anti-rotation tab (6) is inserted into the hole in
the wheelhouse panel.
7. Install the negative battery cable ground terminal bolt (2) at the left wheelhouse panel.
Tighten the bolt to 10 N.m (89 lb in).
8. Install the negative battery cable clip (3) to the shock tower.
9. Connect the engine wiring harness electrical connector (2) to the generator battery control module.
10. Connect the negative battery cable.
