Rainier AWD L6-4.2L (2007)
Installation Procedure
Notice: Refer to Fastener Notice.
1. Install the battery positive cable to the generator and secure the positive cable with the nut (1).
Tighten the generator positive cable nut to 9 N.m (80 lb in).
2. Install the generator and secure the generator with 3 bolts.
Tighten the generator bolts to 50 N.m (37 lb ft).
3. Install the engine lift hook and secure the lift hook with 2 bolts.
Tighten the bolts to 50 N.m (37 lb ft).
4. Install the A/C line bracket to the lift hook and secure the bracket with the bolt.
Tighten the A/C line bracket bolt to 10 N.m (89 lb in).
5. Install the drive belt.
6. Connect the battery negative cable.