Rainier AWD L6-4.2L (2007)
9. Remove and discard the lower ball joint retaining nut.
10. Disconnect the lower ball joint from steering knuckle using the J 43631.
11. Remove the lower control arm to lower control arm bracket mounting nuts.
Important: Note the direction the bolts are removed for installation.
12. Remove the lower control arm to lower control arm bracket mounting bolts.
Important: Take care not to disengage the axle shaft from the transmission (4WD only).
13. Pivot the lower control arm outward and downward in order to disconnect the lower control arm from the lower control arm bracket.
Important: Ensure that the spacer stays in position on the front control arm bracket front bushing.
