Rainier AWD L6-4.2L (2007)
Suspension Spring ( Coil / Leaf ): Service and Repair
Front Suspension Coil Spring
Shock, Shock Component, and/or Spring Replacement
Tools Required
J 45400 Strut Spring Compressor
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation.
3. Remove the shock module from the vehicle. Refer to Shock Module Replacement.
4. Remove the shock module yoke to shock absorber pinch bolt and nut.
5. Spread the shock module yoke at the pinch bolt using a flat-bladed tool.
6. Remove the shock module yoke from the shock absorber.
7. Install pieces of heater hose to the shock module spring where J 45400 contacts lower part of spring.
8. Install the shock module (2) into the J 45400 (1).