Rainier AWD L6-4.2L (2007)
4. Install the ABS sensor to the wheel hub and bearing.
5. Install the ABS sensor mounting bolt to the wheel hub and bearing.
Tighten the ABS sensor to the wheel hub and bearing mounting bolt to 18 N.m (13 lb ft).
6. Install the brake rotor. Refer to Front Brake Rotor Replacement.
7. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation.
8. Lower the vehicle.
9. Install the drive axle nut.
Tighten the drive axle nut to 140 N.m (103 lb ft).
10. Install the tire and wheel center cap.
