Rainier AWD L6-4.2L (2007)
Automatic Transmission Dipstick - Dipstick Tube: Service and Repair
Filler Tube and Seal Replacement (LL8)
Filler Tube and Seal Replacement (LL8)
Removal Procedure
1. Remove the filler tube indicator.
2. Remove the nut (2) securing the filler tube to the secondary air injection reaction (AIR) stud (1).
3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
4. Remove the catalytic converter heat shield.
5. Position a drain pan under the vehicle.
6. Remove the filler tube (1) and seal (2) from the vehicle.