Rainier AWD L6-4.2L (2007)
Automatic Transmission Dipstick - Dipstick Tube: Service and Repair
Filler Tube and Seal Replacement (LM4)
Filler Tube and Seal Replacement (LM4)
Removal Procedure
1. Remove the transmission oil level indicator.
2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
3. Support the transmission using a suitable jack.
4. Remove the transmission crossmember. Refer to Transmission Support Replacement.
5. Loosen the catalytic converter. Refer to Catalytic Converter Replacement (4.2L Engine) Catalytic Converter Replacement (5.3L and 6.0L
Engines).
6. Lower the transmission slightly.
7. Remove the indicator tube nut.