Rainier AWD L6-4.2L (2007)
2. Align the front output shaft seal on the J 45236-2 (1).
3. Using the J 45236-1 (2), install the front output shaft seal.
4. Remove the J 45236-1 and the J 45236-2.
5. Install the dust shield on the front output shaft.
6. Install the front propeller shaft. Refer to Front Propeller Shaft Replacement.
7. Inspect the transfer case fluid level. Refer to Transfer Case Fluid Replacement (TrailBlazer, Envoy, Rainier, Bravada).
8. Install the fuel tank shield, if equipped. Refer to Fuel Tank Shield Replacement (TrailBlazer EXT, Envoy XL) Fuel Tank Shield Replacement
(TrailBlazer, Envoy).
9. Lower the vehicle. Refer to Lifting and Jacking the Vehicle.
Transfer Case Output Shaft Seal Replacement - Rear
Transfer Case Output Shaft Seal Replacement - Rear
Tools Required
^
J 37668-A
^
J 45380
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
