Rainier AWD L6-4.2L (2007)
4. Install the rear propeller shaft. Refer to Rear Propeller Shaft Replacement.
5. Inspect the transfer case fluid level. Refer to Transfer Case Fluid Replacement (TrailBlazer, Envoy, Rainier, Bravada).
6. Lower the vehicle. Refer to Lifting and Jacking the Vehicle.
Transfer Case Input Shaft Seal Replacement
Transfer Case Input Shaft Seal Replacement
Tools Required
J 42738 Seal Installer
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the transfer case assembly. Refer to Transfer Case Assembly Replacement (TrailBlazer, Envoy).
Notice: Refer to Transfer Case Seal Removal Notice.
Notice: Do not damage the sealing surfaces of the transfer cases or the shafts when prying the seals for removal. Damaging the sealing surface
may cause leakage or require replacement of the damaged component.
3. Insert a flat-bladed screw driver between the input shaft seal and the transfer case.
4. Pry the front input shaft seal from the transfer case.
5. Remove the front input shaft seal.