buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Relays and Modules - Transmission and Drivetrain > < NVG 126-NP4 - Transfer Case|Page 15114
Page 4
background image

Notice: Refer to Fastener Notice.

7. Install motor/encoder mounting bolts to the transfer case.

Tighten the bolts to 16 N.m (12 lb ft).

8. Connect the motor/encoder electrical connector (1).
9. Install the fuel tank shield, if equipped. Refer to Fuel Tank Shield Replacement (TrailBlazer EXT, Envoy XL) Fuel Tank Shield Replacement

(TrailBlazer, Envoy).

10. Lower the vehicle. Refer to Lifting and Jacking the Vehicle.

Relays and Modules - Transmission and Drivetrain > < NVG 126-NP4 - Transfer Case|Page 15114