Rainier AWD L6-4.2L VIN S (2005)
4.1.
Detach the window lift module (A) by loosening it in the front edge (snap fastener). Unplug the window lift module's connector.
4.2.
Detach the switch for the roof lighting (B) and unplug its connector. Lift away the floor console.
5.
Pry out the signal line from the SRS control module to the OnStar(R) control module and secure it:
5.1.
Unplug the SRS control module's connector (A).
5.2
Cut off the cable tie (B), detach the connector's rear end face (C) and pull out the connecting rail (D).
