buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

ABOUT US
2001 and Older Model Year Vehicles (Except Saab Vehicles)|Page 9437 > < 2001 and Older Model Year Vehicles (Except Saab Vehicles)|Page 9435

Rainier AWD L6-4.2L VIN S (2005)

Page 3
background image

6.8.

Loosen the locking strip (A) on the 2-pin connector (H2-11) for the optic cable, located by the right-hand A-pillar.

6.9.

Loosen the catch (B) and remove the optic cable that runs backward in the car.

6.10. Dismantle the end cap from the new optic cable (12 783 577) and connect it to the connector H2-11. Push in the optic cable and make sure

the catch (B) locks and refit the locking strip (A).

6.11. Secure the connector and the old optic cable using the cable tie for the existing wiring harness (C).

Important:

2001 and Older Model Year Vehicles (Except Saab Vehicles)|Page 9437 > < 2001 and Older Model Year Vehicles (Except Saab Vehicles)|Page 9435