Rainier AWD L6-4.2L VIN S (2005)
8.3.
Remove the connectors (B).
Important:
The optic cable must not be bent with a radius less than 25 mm (1 in).
Important:
Secure the wiring harness so that there is no risk of chafing and rattling.
8.4.
Fold back the wiring harness and tape over the connectors (C). Fold back the wiring harness once more and secure with cable ties (D).
8.5.
Close the luggage compartment floor.
9.
Fold down the left-hand rear side hatch in the luggage compartment.
10.
M03: Replace the optic cable on the left-hand rear side:
