Rainier AWD L6-4.2L VIN S (2005)
Navigation System: All Technical Service Bulletins
2002 Through 2006 Model Year Vehicles (Except Saab Vehicles)
2002 through 2006 Model Year Vehicles (Except Saab Vehicles)
Important:
The Tech 2 diagnostic tool must be updated with version 28.002 or later in order to successfully perform the VCIM setup procedure and
disable the analog system.
1.
Connect the Tech 2 to the data link connector (DLC), which is located under the instrument panel of the vehicle.
2.
Turn the Tech 2 ON by pressing the power button.
Important:
Tech 2 screen navigation to get to the setup procedure depends on the year and make of the vehicle. The actual name of the setup procedure
(Setup New OnStar or VCIM Setup) depends on model year and vehicle make as well. Example Tech 2 navigation to the setup procedure Tech
2 screen is provided below.
^
Diagnostics >> (2) 2002 >> Passenger Car >> Body >> C >> OnStar >> Special Functions >> Setup New OnStar >>
^
Diagnostics >> (5) 2005 >> Passenger Car >> (4) Buick >> C >> Body >> Vehicle Comm. Interface Module >> Module Setup >> VCIM
Setup >>
3.
Setup VCIM using the Tech 2. Follow on-screen instructions when you have reached the setup Tech 2 screen.
