Rainier AWD L6-4.2L VIN S (2005)
Seal removed without any damage to the air inlet grille panel plastic staked studs. Refer to the above illustration (1). Remove any dirt or debris from the
sealing surface of the air inlet grille panel
Install AIP seal, P/N 25788476. The revised seal has a foam weatherstrip attached to the bottom. Refer to the above illustration (1). The foam
weatherstrip faces the air inlet grille panel. Carefully stretch the revised AIP rubber seal over the plastic staked studs of the air inlet grille panel without
damaging them.
Parts Information
Warranty Information (excluding Saab U.S. Models)
