Rainier AWD L6-4.2L VIN S (2005)
1. Position the latch/lock assembly to the liftgate.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the screws that retain the latch/lock assembly to the liftgate.
Tighten the screws to 10 N.m (89 lb in).
3. Connect the lock cylinder bellcrank rod (1) to the latch/lock assembly.
4. Connect the electrical connector to the latch/lock assembly.
5. Position the bellcrank to the latch/lock assembly.
6. Install the screws that retain the bellcrank to the latch/lock assembly.
Tighten the screws to 0.7 N.m (6 lb in).
7. Connect the bellcrank rod to the latch/lock assembly.
8. Connect the outside handle rod to the bellcrank.
9. Install the liftgate trim panel.
10. Install the liftgate window garnish molding.