buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

07-08-52-003|Page 12288 > < 07-08-52-003|Page 12286
Page 1
background image

Trunk / Liftgate Lock Cylinder: All Technical Service Bulletins
Body - Revised Liftgate Lock Cylinder Replacement

Bulletin No.: 06-08-66-001

Date: February 14, 2006

SERVICE MANUAL UPDATE

Subject:
Revised Liftgate Lock Cylinder Replacement

Models:
2004-2006 Buick Rainier Models
2002-2006 Chevrolet TrailBlazer Models
2002-2006 GMC Envoy Models
2004 Oldsmobile Bravada
2005-2006 Saab 9-7X

This bulletin is being issued to revise the Lock Cylinder Replacement - Liftgate procedure in the Body Rear End sub-section of the Service Manual.
Please replace the current information in the Service Manual with the following information.

The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin
on the affected page.

When replacing the liftgate lock cylinder, removal of the rear window wiper motor, if equipped, is required.

Lock Cylinder Replacement - Liftgate

Removal Procedure

1.

Remove the rear wiper motor. Refer to Wiper Motor Replacement - Rear.

2.

Remove the lock rod from the lock cylinder.

07-08-52-003|Page 12288 > < 07-08-52-003|Page 12286