Rainier AWD L6-4.2L VIN S (2005)
Windshield Moulding / Trim: Service and Repair
Windshield Side Reveal Molding Replacement
Windshield Side Reveal Molding Replacement
Removal Procedure
1. Open the front door.
2. Remove the push-pin retainers (2) from the front door sealing auxiliary weatherstrip located at the base of the pillar.
3. Pull back the front door sealing weatherstrip (1) in order to expose the side reveal molding retainer screws (2).
4. Remove the screws from the side reveal molding.
5. Remove the windshield side reveal molding.
Installation Procedure
1. Install the windshield side reveal molding under the outer edges of the air inlet grille panel.
2. Position the windshield side reveal molding (2) to the windshield pillar.
