Rainier AWD L6-4.2L VIN S (2005)
2. Install new lower rails to the moveable roof panel frame with the lower rail screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the lower rail screws to 2.5 N.m (22 lb in).
3. Shake the black #3 primer for at least 1 minute. Prime any nicks or scratches on the body flange.
IMPORTANT: Do not apply the black #3 primer to the existing bead of urethane adhesive on the pinch-weld flange. Apply the primer only to nicks,
scratches or the primed surfaces.
4. With the aid of an assistant, dry fit the roof module to the body, to assure proper fit.
5. The urethane (2) should be applied to the inboard side of the lower rails (3), and must be touching the up-standing rib (1) of the moveable roof
panel frame to prevent water leakage between the lower rail and the moveable roof panel frame.