Rainier AWD L6-4.2L VIN S (2005)
Sunroof / Moonroof Panel: Service and Repair
Moveable Roof Panel Wiring Harness Replacement
MOVEABLE ROOF PANEL WIRING HARNESS REPLACEMENT
REMOVAL PROCEDURE
1. Remove the moveable roof panel
2. Remove the moveable roof actuator cover.
3. Remove the lock pillar upper tie bar trim panel.
4. Disconnect the electrical connectors to the moveable roof assembly (3), moveable roof control module (1), and the moveable roof motor/actuator
(2).
5. Remove the moveable roof assembly connector retainers from the moveable roof assembly.
6. Carefully lift up the moveable roof front beam panel until the roof assembly connectors can be pulled out from under the front beam assembly.
7. Remove the moveable roof wiring harness from the vehicle.
INSTALLATION PROCEDURE
1. Install the moveable roof wiring harness to the roof module.
2. Carefully lift up the moveable roof front beam panel until the moveable roof assembly connectors can be inserted under the front beam assembly.
3. Install the retainers securing the moveable roof connector to the front beam assembly.
4. Connect the electrical connectors to the moveable roof motor/actuator (2), the moveable roof control module (1), and the moveable roof assembly
(3).
5. Install the lock pillar upper tie bar trim panel.
6. Install the moveable roof actuator cover.
7. Install the moveable roof panel
