Rainier AWD L6-4.2L VIN S (2005)
Seat Cushion: Service and Repair
Seat Cushion Bracket Replacement - Rear No. 1 (TrailBlazer, Envoy, Rainier)
Seat Cushion Bracket Replacement - Rear No. 1 (TrailBlazer, Envoy, Rainier)
Removal Procedure
1. Remove the rear seat cushion assembly from the vehicle.
2. Remove the 2 bolts securing the bracket assembly to the seat cushion.
3. Remove the bracket assembly from the seat cushion.
Installation Procedure
1. Position the bracket assembly on the seat cushion.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 2 bolts securing the bracket assembly to the seat cushion.
Tighten the rear seat cushion bracket bolts to 25 N.m (18 lb ft).
3. Install the rear seat cushion assembly in the vehicle.
