Rainier AWD L6-4.2L VIN S (2005)
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the 4 nuts that secure the seat pan to the power seat adjuster frame.
Tighten the seat pan mounting nuts to 25 N.m (18 lb ft).
5. Install the seat harness to the seat pan.
6. Install the SIR harness (2) to the seat clips (1, 4).
7. Connect the gray lumbar electrical connector (5), if equipped.
8. Connect the black electrical connector (3) to the seat belt buckle.
9. Connect the black electrical connector (6) to the seat back harness.
10. Install the 3 seat switch bezel mounting screws.
