Rainier AWD L6-4.2L VIN S (2005)
Front Door Weatherstrip: Service and Repair
Weatherstrip Replacement - Auxiliary
Weatherstrip Replacement - Auxiliary
Removal Procedure
1. Open the side doors, right or left side.
2. Remove the push pin retainers from the front door sealing weatherstrip located at the base of the pillar.
3. Pull back the front door sealing weatherstrip in order to expose the weatherstrip side retainer screws.
4. Remove the screws from the weatherstrip side retainer.
5. Remove the weatherstrip side retainer from the windshield pillar.
Installation Procedure
1. Install the weatherstrip side retainer to the windshield pillar.
2. Install the screws to the weatherstrip side retainer.
Tighten the screws to the weatherstrip side retainer to 2 N.m (18 lb in).
3. Install the push pin retainers to the front door sealing weatherstrip located at the base of the pillar.
4. Close the doors.