Rainier AWD L6-4.2L VIN S (2005)
Brake Caliper: Service and Repair
Brake Caliper Bracket Replacement - Rear
Brake Caliper Bracket Replacement - Rear
Caution: Refer to Brake Dust Caution in Service Precautions.
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Inspect the brake caliper assembly.
4. Notice: Support the brake caliper with heavy mechanic's wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible
brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which
may cause damage to the brake hose and in turn may cause a brake fluid leak.
Remove the rear brake caliper assembly, relocate the brake caliper to the side.
5. Inspect the brake pads.
6. Remove the front brake pads from the mounting bracket.
7. Inspect the brake hardware.
8. Remove the brake pad retaining clips from the mounting bracket.