Rainier AWD L6-4.2L VIN S (2005)
1. Install the park brake actuator lever housing to the backing plate.
2. Perform the following procedure before installing the backing plate bolts.
1. Remove all traces of the original adhesive patch.
2. Clean the threads of the bolt with brake parts cleaner or the equivalent and allow to dry.
3. Apply Threadlocker GM P/N 12345493 (Canadian P/N 10953488) to the threads of the bolt.
3. Install the backing plate bolts.
Tighten the backing plate bolts to 135 Nm (100 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the park brake shoe.
5. Install the axle shaft.