Rainier AWD L6-4.2L VIN S (2005)
Coolant Reservoir: Service and Repair
Coolant Recovery Reservoir Replacement
Coolant Recovery Reservoir Replacement
Removal Procedure
1. Remove the air cleaner assembly.
2. Remove the accumulator.
3. Remove the coolant hoses from the coolant recovery reservoir and plug the hoses and the coolant recovery reservoir outlets with suitable plugs (2).
4. Remove the nut and bolt securing the coolant recovery reservoir.
5. Remove the coolant recovery reservoir.
Installation Procedure
1. Install the coolant recovery reservoir.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the coolant recovery reservoir bolt.
Tighten the bolt to 12 Nm (106 inch lbs.).
3. Install the coolant recovery reservoir nut.
Tighten the nut to 10 Nm (89 inch lbs.).
4. Install the coolant hose to the coolant recovery reservoir (2).
5. Install the accumulator.
6. Install the air cleaner assembly.