Rainier AWD L6-4.2L VIN S (2005)
7. Remove the camshafts.
Installation Procedure
1. Coat the camshaft journals, camshaft journal thrust face, and camshaft lobes with clean engine oil.
2. Install the intake and exhaust camshafts to their original positions.
3. Install the J 44221 with the camshaft flats up and the number 1 cylinder at top dead center.
4. Install the camshaft caps and bolts.
Tighten the camshaft cap bolts to 12 Nm (106 inch lbs.).
Notice: Refer to Fastener Notice in Service Precautions.