Rainier AWD L6-4.2L VIN S (2005)
7. Connect the integral clip (3) to the wire harness bracket.
8. Connect the fuel feed (1) and fuel return (2) pipes to the fuel rail.
9. Connect the ECT sensor electrical connector (1).
10. Install the PCM mounting studs (5) to the intake manifold.
Tighten the studs to 6 Nm (53 inch lbs.).
11. Install the PCM (1) onto the studs (5).
12. Install the PCM retaining bolts (3).
Tighten the bolts to 8 Nm (71 inch lbs.).
13. Install the PCM retaining nuts (6).
Tighten the nuts to 8 Nm (71 inch lbs.).
14. Fill the cooling system.
