Rainier AWD L6-4.2L VIN S (2005)
Idler Pulley: Service and Repair
Drive Belt Idler Pulley Replacement
Removal Procedure
1. Remove the drive belt.
2. Remove the idler pulley bolt from the idler pulley bracket.
3. Remove idler pulley.
Installation Procedure
1. Install the idler pulley and secure the pulley with the bolt.
Tighten the idler pulley bolt to 50 Nm (37 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the drive belt.
