Rainier AWD L6-4.2L VIN S (2005)
4. Inspect the oil pan alignment. Use a straight edge on the back of the block and the oil pan transmission mounting surface.
Tighten
Oil pan side bolts to 25 Nm (18 lb ft).
Oil pan end bolts to 10 Nm (89 lb in).
5. Install the 4 transmission bell housing bolts that attach to the oil pan.
Tighten
Bolts to 47 Nm (35 lb ft).
6. Clip transmission cooler lines to the engine block.
7. Install the front drive axle intermediate shaft bearing assembly.
