Rainier AWD L6-4.2L VIN S (2005)
4. Install the cylinder head access hole plugs.
Tighten the cylinder head access hole plugs to 5 Nm (44 inch lbs.).
5. Install the J 44221 with the camshaft flats up and the number 1 piston at top dead center. The crank pin will be at 12 o'clock when the number 1
piston is at top dead center.
6. Install the crankshaft sprocket (1).
7. Install the intake camshaft sprocket into the timing chain.
8. Align the dark link of the timing chain with the timing mark on the intake camshaft sprocket (1).
9. Feed the timing chain down through the opening in the head.
10. Install the timing chain on the crankshaft sprocket. Align the dark link of the timing chain with the timing mark on to the crankshaft sprocket.
