Rainier AWD L6-4.2L VIN S (2005)
1. Using a flat bladed tool, carefully pry out on the top of the HVAC control-auxiliary.
2. Remove the HVAC control-auxiliary from the center console/seat.
3. Disconnect the electrical connector.
4. Remove the HVAC control-auxiliary.
INSTALLATION PROCEDURE
1. Connect the HVAC control-auxiliary electrical connector.
2. Install the HVAC control-auxiliary in the console bottom first.
3. Push in at the top of the HVAC control-auxiliary in order to engage the HVAC control-auxiliary in the console/seat.
