Rainier AWD L6-4.2L VIN S (2005)
Air Bag(s) Arming and Disarming: Service and Repair
SIR Disabling and Enabling Zone 8
SIR DISABLING AND ENABLING ZONE 8
DISABLING PROCEDURE
1. Turn the steering wheel until the vehicle wheels are pointing straight ahead.
IMPORTANT: Refer to SIR Service Precautions before disabling the SIR system.
2. Turn OFF the ignition.
3. Remove the key from the ignition.
4. Remove the trim panel.
5. Access the instrument panel (I/P) module connector through the glove box.
6. Remove the SIR fuse from the fuse block (1) located in the underhood fuse block.
IMPORTANT: With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
an SIR system malfunction.
7. Remove the connector position assurance (CPA) (1) from the steering wheel module yellow 4-way connector (2) located left of the steering
column near the knee bolster.
8. Disconnect the steering wheel module yellow 4-way connector located left of the steering column near the knee bolster.
