Rainier AWD L6-4.2L VIN S (2005)
Door/Trunk Ajar Indicator/Lamp: Description and Operation
DOOR AJAR INDICATOR DESCRIPTION AND OPERATION
DOOR AJAR INDICATOR SYSTEM COMPONENTS
The door ajar indicator system consists of the following components.
-
The driver door module (DDM)
-
The passenger front door module (PDM)
-
The body control module (BCM)
-
The instrument panel cluster (IPC)
-
The driver information center (DIC)
-
The driver door ajar switch
-
The passenger door ajar switch
-
The left rear door ajar switch
-
The right rear door ajar switch
DRIVER DOOR AJAR AND PASSENGER DOOR AJAR
The DDM and PDM receive a discrete input from the respective door ajar switch to indicate the status of the door. The DDM or PDM then
communicates this status to the IPC via class 2 message. The IPC, upon receipt of this class 2 message, will illuminate the appropriate door ajar
message in the DIC and also send a class 2 message to the radio to activate the door ajar audible warning when the following conditions are met:
-
The transmission is removed from PARK
-
The vehicle speed is greater then 8.05 km/h (5 mph)
LEFT REAR DOOR AJAR AND RIGHT REAR DOOR AJAR
The BCM receives a discrete inputs from both the left and right rear door ajar switches to indicate the status of the doors. The BCM then
communicates this status to the IPC via class 2 message. The IPC, upon receipt of this class 2 message, will illuminate the appropriate door ajar
message in the DIC and also send a class 2 message to the radio to activate the door ajar audible warning when the following conditions are met:
-
The transmission is removed from PARK
-
The vehicle speed is greater then 8.05 km/h (5 mph)
