Rainier AWD L6-4.2L VIN S (2005)
Parking Light Bulb: Service and Repair
PARK/TURN SIGNAL/SIDE MARKER LAMP BULB REPLACEMENT
REMOVAL PROCEDURE
1. Open the hood.
2. Remove the headlamp.
3. Rotate the bulb and socket counterclockwise in order to remove the bulb and socket from the housing.
4. Remove the turn signal/park bulb (3) from the socket.
INSTALLATION PROCEDURE
1. Install the turn signal/park bulb (3) to the socket.
2. Wipe the bulb with a clean cloth to ensure the bulb is free of any dirt or oil.
3. Install the bulb and socket to the headlamp by rotating the bulb and socket clockwise, locking the retaining tabs to the headlamp.
4. Install the headlamp.
5. Close the hood.
