Rainier AWD L6-4.2L VIN S (2005)
Oil Change Reminder Lamp: Service and Repair
HOW TO RESET THE ENGINE OIL LIFE SYSTEM
The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. Anytime the oil is changed, reset the system so it
can calculate when the next oil change is required. If a situation occurs where you change the oil prior to a change engine oil light or "CHANGE OIL
SOON" message being turned on, reset the system.
After changing the engine oil, reset the system by performing the following steps:
1. With the engine off, turn the ignition key to "RUN".
2. Fully press and release the accelerator pedal slowly three times within five seconds.
3. Turn the key to "OFF", then start the vehicle.
If the light or message comes back on when you start your vehicle, the oil life system has not reset. Repeat the procedure.
WHAT TO DO WITH USED OIL
Used engine oil contains certain elements that may be unhealthy for your skin and could even cause cancer. Do not let used oil stay on your skin for
very long. Clean your skin and nails with soap and water, or a good hand cleaner. Wash or properly dispose of clothing or rags containing used engine
oil.
Used oil can be a threat to the environment. If you change your own oil, be sure to drain all the oil from the filter before disposal. Never dispose of oil
by putting it in the trash, pouring it on the ground, into sewers, or into streams or bodies of water. Instead, recycle it by taking it to a place that collects
used oil. If you have a problem properly disposing of used oil, ask your dealer, a service station or a local recycling center for help.
