buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

ABOUT US
Crankshaft Position Sensor > < Coolant Temperature Sensor/Switch (For Computer)|Locations|Page 4114

Rainier AWD L6-4.2L VIN S (2005)

Page 2
background image

Tighten the ECT sensor to 16 N.m (12 lb ft).

3. Connect the ECT electrical connector (1).
4. Install the generator and the drive belt.
5. Connect the negative battery terminal.
6. Refill the engine coolant. Refer to Draining and Filling Cooling System (LL8) Draining and Filling Cooling System (LM4) in Cooling System.

Crankshaft Position Sensor > < Coolant Temperature Sensor/Switch (For Computer)|Locations|Page 4114