Rainier AWD L6-4.2L VIN S (2005)
2.
Disconnect both the air inlet and air outlet pipe from the secondary air injection reaction (AIR) pump.
3.
Remove the air inlet and air outlet pipe retaining clip from the fuel rail.
4.
Lower the vehicle.
Important:
It is not necessary to remove the throttle body to remove the intake manifold.
5.
Remove the intake manifold. Refer to Intake Manifold Replacement.
6.
Remove the number 6 ignition coil. Refer to Ignition Coil Replacement.
7.
Disconnect the AIR hose from the air box.
8.
Disconnect the AIR hose from the solenoid valve.
