Rainier AWD L6-4.2L VIN S (2005)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Canister Vent
EVAPORATIVE EMISSION (EVAP) HOSES/PIPES REPLACEMENT - CANISTER VENT
REMOVAL PROCEDURE
CAUTION: Refer to Fuel and EVAP Pipe Caution in Service Precautions.
NOTE: Refer to Fuel and Evaporative Emission (EVAP) Hose/Pipe Connection Cleaning Notice in Service Precautions.
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Disconnect the EVAP canister purge pipe (1) from the EVAP canister and the fuel tank.
IMPORTANT: Before disconnecting or reconnecting evaporative emission (EVAP) pipes. Refer to Quick Connect Fitting(s) Service (Plastic
Collar).
3. Disconnect the EVAP canister fresh air pipe (2) from the EVAP canister and the fuel tank.
4. Disconnect the EVAP canister vent solenoid valve pipe (3) from the EVAP canister and the vent solenoid valve.
5. Remove the pipes from the pipe retainer.
INSTALLATION PROCEDURE
1. Install the pipes to the pipe retainer.
2. Connect the EVAP canister vent solenoid valve pipe (3) to the EVAP canister and the vent solenoid valve.
3. Connect the EVAP canister fresh air pipe (2) to the EVAP canister and the fuel tank.
4. Disconnect the EVAP canister purge pipe (1) from the EVAP canister and the fuel tank.
