buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Fuel Injector Cleaning Procedure|Page 4394 > < Fuel Injector Cleaning Procedure
Page 2
background image

15. Repeat steps 1-5 of the Injector Balance Test, and record the fuel pressure drop from each injector.
16. Subtract the lowest fuel pressure drop from the highest fuel pressure drop. If the value is 15 kPa (2 psi) or less, no additional action is required. If

the value is greater than 15 kPa (2 psi), replace the injector with the lowest fuel pressure drop.

17. Add one ounce of Port Fuel Injector Cleaner, GM P/N 12345104 (Canadian P/N 10953467), to the vehicle fuel tank for each gallon of gasoline

estimated to be in the fuel tank. Instruct the customer to add the reminder of the bottle of Port Fuel Injector Cleaner to the vehicle fuel tank at the
next fill-up.

18. Advise the customer to change brands of fuel and to add GM Port Fuel Injector Cleaner every 5,000 km (3,000 mi). GM Port Fuel Injector

Cleaner contains the same additives that the fuel companies are removing from the fuel to reduce costs. Regular use of GM Port Fuel Injector
Cleaner should keep the customer from having to repeat the injector cleaning procedure.

19. Road test the vehicle to verify that the customer concern has been corrected.

Fuel Injector Cleaning Procedure|Page 4394 > < Fuel Injector Cleaning Procedure