Rainier AWD L6-4.2L VIN S (2005)
1. Install the fuel fill pipe to the vehicle frame and install the push-pin retainer.
2. Install the fuel fill pipe ground strap bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolt to 10 N.m (89 lb in).
3. Uncap the fuel fill hose.
4. Connect the fuel fill pipe to the fuel tank.
Tighten the clamp to 2.5 N.m (22 lb in).
5. Connect the fuel filler pipe recirculation hose to the fuel tank.
6. Lower the vehicle.
7. Install the fuel fill pipe bracket nuts (2).
Tighten the nuts to 10 N.m (89 lb in).
8. Install the fuel fill pipe housing.
9. Install the fuel fill cap.
