Rainier AWD L6-4.2L VIN S (2005)
Electronic Brake Control Module: Service and Repair
Electronic Brake Control Module Programming and Setup
ELECTRONIC BRAKE CONTROL MODULE PROGRAMMING AND SETUP
EBCM Replacement
If the electronic brake control module (EBCM) is replaced, the following procedures must be performed:
-
EBCM Reprogramming--Refer to Service Programming System (SPS) .
-
Revise the tire calibration using the Scan Tool Tire Size calibration function.
EBCM Reprogramming
If the EBCM needs to be reprogrammed, refer to Service Programming System (SPS) .
