Rainier AWD L6-4.2L VIN S (2005)
9. Remove the CPA from the I/P module yellow 4-way connector (1) located behind the I/P support.
10. Disconnect the I/P module yellow 4-way connector (1) located behind the I/P support.
11. Remove the CPA from the RF seat belt pretensioner yellow 2-way connector (1) located under the passenger seat.
12. Disconnect the RF seat belt pretensioner yellow 2-way connector (1) located under the passenger seat.
13. Remove the garnish molding.
14. Remove the CPA from the inflatable restraint roof rail module - right yellow 2-way inline connector.
15. Disconnect the inflatable restraint roof rail module - right yellow 2-way inline connector from the vehicle harness connector.
