Rainier AWD L6-4.2L VIN S (2005)
Tighten the screws to 9 N.m (80 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the top of the seat belt retractor assembly to the seat back frame with the plastic push pin (2).
4. Install the front seat back panel.
5. Install the seat back cover and pad.
6. Install the seat trim panel.
7. Install the seat assembly to the vehicle.
8. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 2 and SIR Disabling and Enabling Zone 6.
