Rainier AWD L6-4.2L VIN S (2005)
Seat Belt: Service and Repair
SEAT BELT REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Remove the seat switch bezel.
2. Remove the seat trim panel.
3. Remove the seat belt anchor nut from the seat adjuster assembly.
4. Remove the screw from the front seat back seat belt bezel.
5. Slide the bezel off the seat belt.
6. Remove the seat back cover and pad.
7. Remove the seat back panel from the seat back frame.
8. Remove the seat belt from the retractor bracket by sliding the seat belt through the slot.
9. Remove the lower seat belt retractor retaining bolt and nut.
10. Remove the retractor assembly by pulling the push pin (2) from the seat back frame.
