Rainier AWD L6-4.2L VIN S (2005)
Power Seat Switch: Service and Repair
Seat Switch Bezel Replacement
Seat Switch Bezel Replacement
Removal Procedure
1. Remove the 3 screws that retain the switch bezel to the seat.
2. Partially remove the switch bezel from the seat.
3. Remove the seat switches from the switch bezel by releasing the retaining tabs.
4. Remove the lumbar switch from the switch bezel by releasing the retaining tabs.
5. Remove the switch bezel from the seat.
Installation Procedure
1. Install the lumbar switch to the switch bezel, verifying that the retaining tabs are fully seated.
2. Install the seat switches to the switch bezel, verifying that the retaining tabs are fully seated.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the switch bezel to the seat with the 3 screws.
Tighten the front seat switch bezel screws to 3 N.m (26 lb in).
