Rainier AWD L6-4.2L VIN S (2005)
Cabin Temperature Sensor / Switch: Service and Repair
INSIDE AIR TEMPERATURE SENSOR ASSEMBLY REPLACEMENT
REMOVAL PROCEDURE
1. Remove the upper portion of the left center trim pillar.
IMPORTANT: Recline the driver seat rearward to access the left center trim pillar.
2. Disconnect the electrical connector.
3. Remove the retaining clips from the B pillar.
4. Remove the inside air temperature sensor assembly (1) from the B pillar.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the inside air temperature sensor assembly (1).
2. Install the inside air temperature sensor assembly (1) to the B pillar.
3. Install the retaining clips to the B pillar.
4. Install the upper portion of the left center trim pillar.
