Rainier AWD L6-4.2L VIN S (2005)
4. Ensure that the hex on the rotary position sensor (2) fits in the hex of the motor/encoder housing (3).
5. Install the motor/encoder baseplate/gasket (1).
6. Important: When performing this service procedure, make sure that the motor/encoder unit is flat against the transfer case for proper installation.
Install the motor/encoder to the transfer case.
7. Notice: Refer to Fastener in Service Precautions.
Install motor/encoder mounting bolts to the transfer case.
Tighten the bolts to 16 Nm (12 ft. lbs.).