Rainier AWD L6-4.2L VIN S (2005)
Speed Sensor: Service and Repair
NVG 226-NP8
Transfer Case Speed Sensor Replacement - Front
Transfer Case Speed Sensor Replacement - Front (TrailBlazer, Envoy, Rainier)
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the fuel tank shield, if equipped.
3. Remove the transfer case front speed sensor electrical connector.
4. Remove the transfer case front speed sensor.
Installation Procedure
1. Notice: Refer to Fastener in Service Precautions.
Install the transfer case front speed sensor.
Tighten the speed sensor to 17 Nm (13 ft. lbs.).
